3,4-dimethoxybenzylzinc chloride solution - Names and Identifiers
3,4-dimethoxybenzylzinc chloride solution - Physico-chemical Properties
Molecular Formula | C9H11ClO2Zn
|
Molar Mass | 252.03 |
Density | 0.968g/mLat 25°C |
Boling Point | 65°C |
Flash Point | 1°F |
Storage Condition | 2-8°C |
3,4-dimethoxybenzylzinc chloride solution - Risk and Safety
Risk Codes | R11 - Highly Flammable
R19 - May form explosive peroxides
R22 - Harmful if swallowed
R36/38 - Irritating to eyes and skin.
R40 - Limited evidence of a carcinogenic effect
R36/37 - Irritating to eyes and respiratory system.
R14 - Reacts violently with water
|
Safety Description | S16 - Keep away from sources of ignition.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S33 - Take precautionary measures against static discharges.
S36 - Wear suitable protective clothing.
S36/37 - Wear suitable protective clothing and gloves.
|
UN IDs | UN 2056 3/PG 2 |
WGK Germany | 1 |
3,4-dimethoxybenzylzinc chloride solution - Introduction
The 3,4-Dimethoxybenzylzinc chloride is an organozinc reagent with the formula C9H11ClO2Zn. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: colorless or light yellow liquid
-Density: approx. 1.14g/cm³
-Melting point: about -30 ℃
-Boiling point: about 220 ℃
Use:
- 3,4-Dimethoxybenzylzinc chloride is commonly used in organic synthesis as an organic zinc reagent, which can be used for alkylation, alcoholization, reduction, cyclization and other reactions.
-It can react with other organic compounds to generate new organic molecules.
Preparation Method:
- 3,4-Dimethoxybenzylzinc chloride can be obtained by reacting 3,4-dimethoxybenzyl bromide or other corresponding haloalkyl groups with zinc chloride in an organic solvent.
Safety Information:
- 3,4-Dimethoxybenzylzinc chloride is irritating to skin and eyes, please be careful to avoid contact.
-Wear suitable protective gloves and eye protection when using.
-During the operation, it should be carried out in a well-ventilated place to prevent inhalation of aerosols.
Last Update:2024-04-10 22:29:15